|
Personal Details
Name: Mohammad Ali
Surname: Ghazavi
Nationality: Iranian
Date of Birth: 1973
Place of Birth: Isfahan, Iran
Email Addresses:mghazavi@gmail.com
Educations
1997: Ph.D. in Agricultural Engineering, Faculty of Agriculture and Biological Sciences, Newcastle University, Newcastle Upon Tyne, England.
1989: M.Sc., in Mechanics of Agricultural Machinery, Faculty of Agriculture, Tarbiat Modarres University, Tehran, Iran.
1980: B.Sc., in Agricultural Machinery, Faculty of Agriculture, Tabriz University, Tabriz, Iran.
WORK EXPERIENCES:
Jan. 1989 - Present : Full time academic staff, Shahre-Kord University, Shahre-Kord Iran.
April 1985–1989: Establisher and head of the first Agricultural Machinery Research Center in Isfahan, Ministry of Jehad of Agriculture, Iran.
April 1998– 2002:Establisher and the first Dean of the Agricultural Faculty of Azad University,Isfahan, Iran.
Jun. 1989 – Present : Establisher and Member of Directorate of "Kesht Abzar Kar Company" (research and producer of agricultural machinery), Isfahan, Iran.
April 1998– 2002 : Establisher and the first Head of Supervision Office, Shahre-Kord University, Iran.
April 1980-1986 :Full time staff & head of Farm Machinery Department, Isfahan Agricultural Organisation, Ministry of Jehad of Agriculture, Iran.
April 1998– 2002 : Member of Research Committee of Azad & Shahre-Kord Universities, Iran. November 20003-2005 Head of Department (Mechanics of Agricultural Machinery Dep.), Shahrekord Un., Iran.
Since May 2006 :Member of Editorial Board of "'Research in Agricultural Science", Agricultural Faculty, Islamic Azad University, Khorasgan Branch, Isfahan, Iran.
Since July 2006 : Assistant Director of planning, Employment &…, "Isfahan Agricultural Engineering Society Organisation" (Directorate Member) and Treasurer.
Since Oct. 2007:Head of Department (Mechanics of Agricultural Machinery Dep.), Shahrekord Un., Iran.
Publications :
[1] Ghazavi, M. A. (1989). Prototype of the first Dryland Drill planter in Iran, M.Sc. thesis, Tarbiat Modarres University, Iran.
[2] Ghazavi, M.A. (1997). Energy Inputs and Resulting soil physical conditions of primary tillage implements Ph.D. thesis, Newcastle University, England.
[3] Ghazavi, M.A. and I. J. Yule (1999). A comparison of the performance of a high-speed disk plough and a general-purpose moldboard plough. Iran Agricultural Research J. Shiraz Uni. Shiraz, Iran.
[4] Ghazavi, M.A. and I.J.Yule (1996). A Comparison of the energy input of three primary tillage Tools and their Physical effect on the soil. International Erg. Eng., 98 Conference on Agricultural Engineering Madrid (Spain ).
[5] Ghazavi, M.A. (1997). A comparison of moldboard plough and high speed plough performance in relation to rainwater catchment systems, the International Conference on Rainwater Catchment Systems. 21-25 April, Tehran.
[6] Ghazavi, M.A. (1998) A procedure for energy and soil physic measurement in tillage operation (in persian). The role of industry in agricultural improvement . Isfahan , Iran, 6-8 May.
[7] Ghazavi, M.A. (1996). A comparative study of three primary tillage tools, examining energy inputs and soil physical changes. the fourth Iranian Agricultural students meeting. Newcastle, England 25 th July.
[8] Ghazavi, M.A. (1999). Prototype of an improved disk plough for Iran conditions (in persian). The first conference on agricultural machinery and mechanization. Karaj , Iran. 17-19 August.
[9] Ghazavi, M.A. (2000). The improvment of soil fertility by using plant residue in the soil. the first conference on using the sources of recycling and renewal material in agriculture (in persian). khorasgan Azad University Isfshan , Iran. 11-12 May.
[10] Ghazavi, M.A. (2004). Prototype of a comparatively precise and cheap relief-meter. The third National Agricultural Machinery and Mechanization Congress (in persian). 31 August –2 September (10-12 Shahrivar 1383), Shahid Bahonar University, Kerman, Iran. 17-19 Aban,
[11] Ghazavi, M.A. (2004). Soil dry density and moisture content study due to different soil tillage management. The fourth International Iran and Russia conference on ‘Agriculture and Natural Resources’.September 8-10. Shahre-Kord, Iran.
[12] Ghazavi, M.A. (2004). Potato mechanization in Iran. The fourth International Crop Science Congress. 26 September –10 October. Brasbane, Australia.
[13] Ghazavi, M.A. (2005). Consideration of potato mechanical damages due to harvesting machines (in persian). the second conference on using the sources of recycling and renewal material in agriculture. khorasgan Azad University Isfshan , Iran. 9-10 November.
[14] Ghazavi, M.A. (2005). Production of compost from tree branches chips (in persian). the second conference on using the sources of recycling and renewal material in agriculture. khorasgan Azad University Isfshan , Iran. 9-10 November.
[15] Ghazavi, M.A. (2005). Consideration of soil tillage effect on potato storage (in persian). the second conference on using the sources of recycling and renewal material in agriculture. khorasgan Azad University Isfshan , Iran. 9-10 November.
[16] Ghazavi, M.A. (2005). Prototype of first wood chipper in iran and some its output applications (in persian). the fourth horticulture congress in Iran. Ferdosi University. Mashad, Iran. 9-11 November.
[17] Ghazavi, M.A. (2005). Introducing a new tillage tool for Iran Physiological Condition (in persian). the fourth national agricultural scientific research congress in Iran. Ferdosi University. Mashad, Iran. 23-25 November.
[18] Ghazavi, M.A. (2006). Application of relief-meter (prototyped in Iran) in reduction of soil wind erosion and its measurement (in persian). the first national conference of wind erosion. Yazd – Iran, 24-26 January.
[19] Ghazavi, M.A. (2006). Effect of potato storage temperature on respiration rate (in persian). The 16th National Congress of food industry (1st Regional Congress). Gorgan Agricultural & Natural Science University. Gorgan. Iran. 12-13 April.
[20] Ghazavi, M.A. (2006). Effect of tillage management on potato tubers size, weight and shape(in persian). The fourth National Congress of Agricultural Machinery and Mechanisation. Tabriz University, Tabriz, Iran. 1 -2 September.
[21] Ghazavi, M.A. (2006). Introducing an easy method for rain water conservation in soil and soil erosion prevention (in persian). The First Regional Congress of better exploitation of Karoon and Zayanderood Water resources. ShahreKord University, ShahreKord, Iran. 7-8 September.
[22] Mohammadi Gol Reza, Arjang Javadi and Mohammad Ali Ghazavi (2006). Comparison of 2 combined tillage tool with Moldboard plow and their effect on soil physical properties (in Persian). The fourth National Congress of Agricultural Machinery and Mechanisation. Tabriz University, Tabriz, Iran. 1 -2 September.
[23] Ghazavi, M.A. (1996). A comparative study of three primary tillage tools, examining energy inputs and soil physical changes. the fourth Iranian Agricultural students meeting. Newcastle, England 25 th July.
[24] Abedi Asghar, M. A. Ghazavi. (2006) Economy Study of soil erosion decline due to cultivation operation, 6th conference on agricultural economy, Azar 84.
[25] Mahmoodieh Ramazan Ali , Mohammad Ali Ghazavi and Mortaza Almasi (2007). Effect of cultivation method and cutting stem on mechanical properties of potato tubers (in persian). Research and Constractiveness Journal. A scientific, research and training publication of the Jehade Keshavarzy. Agronomy 77 Winter.
[26] Mohammadi Gol Reza, Arjang Javadi and Mohammad Ali Ghazavi (2007). Draft and Tractive power comparison of two combined tillage tool with traditional moldboard plow (in Persian). Scientific research Journal of Agricultural Engineering Research . V. 39 (acceptance received).
[27] Ghazavi, M.A. (2007) Evaluation of a new tillage tool; considering soil physical property, energy requirement and potato yield. Pakistan Journal of Biological Sciences, 10(22): 4050-4056,
[28] Abedi Asghar, M. A. Ghazavi. (2007) Prevention of Potqto Losses (Economy Study), Third National Conference on using the sources of recycling and Agricultural renewal material (in Persian). Tarbiat modarres Un. Tehran. 29-30 Aban 1386.
[29] Ghazavi M.A., (2008). Effects of mechanical damages and storage temperature on potatorespiration rate and lose weight. The 5th international crop science congress, Jeju, Koria. Aprill 13 to 18,
[30] Shirneshan A.R., M.A. Ghazavi, M. Poursina, B. Hosseinzadeh. (2009). Shear strength and area density of the leaves of five tree species in Esfahan city. World Applied Sciences Journal, Biotechnology Research Research Center, Noshirvan Un. Of Technology, Babol, Iran. Accepted date: Oct. 20,.
[31] Shirneshan A.R., M.A. Ghazavi, M. Poursina and B. Hosseinzadeh. Selection, Designe and software analysis of cutter section of a leaves sucker and cutter machine. Fifth national congress on Agricultural machinery and mechanization. (paper code 339), Ferdosi Un. Meshedm Iran.
[32] Shirneshan A.R., M.A. Ghazavi, M. Poursina, determination of plane, willow, ash, elm and berry tree leaves and stalks shear strength. Fifth national congress on Agricultural machinery and mechanization. (paper code 106), Ferdosi Un. Meshed, Iran.
[33] Hosein Zadeh Bahram, Yonegi S. And M.A. Ghazavi. . Effect of different tillage toolsn, depth, speed, tractor travelling on soil mechanics resistance (in Persian). Fifth national congress on Agricultural machinery and mechanization. (paper code 525).
[34] Beigi Mohsen and M.A. Ghazavi, Designe of an improved 3 point linkage dynamometer. Fifth national congress on Agricultural machinery and mechanization. (paper code 106), Ferdosi Un. Meshedm Iran.
[35] Shirneshan A.R . M. Poursina and M.A. Ghazavi (2008), Blade kind determination of the leaves blower and cutter machine by compuer software analysis of leaves and stalks shear forces effects on blade. (in Persian). National congress on Mechanical Eng. Azad Un., Khomeinishahr branch. Aban, 1387.
[36] Fazel Farhad, M. Poursina and M.A. Ghazavi (2008), Computing analysis of effect of soil cutting forces and sod roots on blade of sod cutter machine (in Persian). National congress on Mechanical Eng. Azad Un., Khomeinishahr branch. Aban, 1387.
[37] Yousofvand A. and M.A. Ghazavi, (2008). Tillage and stubble management in soil moisture preservation and erosion prevention. Tird national congress of recycling and reuse of renewable organic resources in agriculture. Islamic Azad Un., Khorasgan branch, Isfahan, Iran. 13-15 May.
[38] Lotfalian Amin, M.A. Ghazavi. (2009). Lemon drying by solar passive drier. The 14th regional conference of new idias in agriculture (in Persian). 21-22 October, Azad Un. Khorasgan branch, Isfahan, Iran.
[39] Lotfalian Amin, M.A. Ghazavi. (2009). The use of solar energy in gardens irrigation systems. The 14th regional conference of new idias in agriculture (in Persian). 21-22 October, Azad Un. Khorasgan branch, Isfahan, Iran.
[40] Shirneshan A.R., M.A. Ghazavi, M. Poursina and Hoseinzadeh B. Shear Strength and Area Density of the Leaves of Five Trees Species in Esfahan City. World Applied Sciences Journal, ISSN 1818-4952, © IDOSI Publications, 7(4): 515-521, 2009.
[41] Tabatabaei S.H., M. Aghababaei, P. Najafi, M.A. Ghazavi. (2009), Evaluation of Four Cultivation Types on Distribution Uniformity (DU) IN Border Irrigation System. ISTRO 18th Triennial Conference Proceedings, June15-19, 2009 Izmir-Turkey.
UNPUBLISHED PROJECTS REPORTS:
[1] Ghazavi, M.A. (1990). Prototype of an Improved Disc Plough (in persian). Supported by the Ministry of Jehad of Agriculture, Iran.
[2] Ghazavi, M.A. (2001). Prototype of a Micro Relief Meter. Supported by Shahre-Kord University., Iran.
[3] Ghazavi, M.A. (2005) Potato mechanization in Esfahan. Supported by Islamic Azad University, Khorasgan branch. Esfahan, Iran.
[4] Ghazavi, M.A.; M. Hoodaji and N. Honarjoo. Soil residue management. Supported by Esfahan Azad University, Iran.
CURRENT PROJECTS:
[1] Ghazavi M.A., Prototype of a Tillage machine for dry and semi dry area. Supported by Ministry of Agriculture, Tehran, Iran. (Finished)
[2] Ghazavi M.A, Potato Mechanization in Isfahan. Supported by Azad University, Khorasgan branch, Isfahan, Iran. (Finished) .
[3] Ghazavi M.A, Consideration of potato damages due harvesting machines and study the respiration rate of them. Supported by Bio 2.Ghazavi M.A., Tillage and residue management effect on physical and biological properties and yield production in ShahreKord. Supported by Shahrekord University, ShahreKord, Iran. 3.. Ghazavi, M.A, Prototype of an improved 3 point linkage dynamometer, Supported by Shahrekord Un. Shahrekord, Iran.
[4] Tabatabaei S.H., Ghazavi M.A. and P. Najafi;. Consideration of four cultivation types effects on water moving ahead value in clay soil. Supported by Shahrekord Un. Shahrekord, Iran.(finished) .
AWARDS:
April, 1993 : A Ph.D. study scholarship given by the Ministry of Science and Higher Education, Iran.
Jan. 1986 : A M.Sc. study scholarship given by the Ministry of Science and Higher Education, Iran.
Mar. 2002 :A sabbatical leave scholarship given by Shahre-Kord University, Iran.
RESEARCH INTERESTS:
Tillage Management, Design and Prototype of Agricultural Machinery and Research Equipment, Mechanization, Phisical and mechanical properties of agricultural production, Energy, Engines.
TEACHING COURSES:
Agricultural Machinery, Mechanics of Tractor and Equipment, Tillage, Planting, Technology of Motor, Project, Harvesting, Sciences of Materials. Power Machinery. Workshop,(BS C.) [Soil and machine interaction, Manufacturing Methods and Manufactory, (MS c.)]…
PROFESSIONAL ORGANISATIONS:
• Member of The Iranian Society of Agricultural Mechanization and Machinery and Engineering(Membership No.: 791022).
• Member of The Isfahan Society of Agricultural Mechanization and Machinery Manufaturers.
• Member of Newcastle University Graduate Student Society. England.
• Member of Tarbiat Modarres University Graduate Student Society. Iran.
• Member of Tabriz University Graduate Student Society. Iran.
• Member of ASAE USA..
• Member of "Isfahan Agricultural Engineering Society Organisation"
• Member of “Iranian Inventors Associations” N. 1220.
REFERENCES:
• Dr. Ahmadali Foroughi Abari, Chancellor of Islamic Azad Universitry, Isfahan Branch. Iran. Tel:01198- 311- 5221004 Fax:01198-311-5230458
Email Addresses:chancellor@khuisf.ac.ir
• Dr. Mehran Hoodaji, Vice-president , Azad Universitry, Isfahan Branch. Iran. 01198-311-5211229, 01198-311-5211266 Fax: 01198-311-5211265
Email Addresses:m_hoodaji@yahoo.com
• Dr. Motamedi, Chancellor of Shahre-Kord University. Tel: 01198-381-4424411 Fax: 01198-381-4424412
• Dr Abolfazl Rangbar, Dean of Agricultural Faculty, Shahre-Kord University, Shahre-Kord, Iran. Tel.: 01198-381-4424428 Fax: 01198-381-4424428 .
Email Addresses:a_rangbar @yahoo.com
Inventions:
[1] A new high speed plough. Declaration number: 38406234, date of declaration patent: 84/9/12.
[2] Prototype of an Electronic Micro relief-Meter. Declaration number: 60730, date of declaration patent: 88/5/28.
Thesis guidance :
[1] Mohammadi Gol Reza. (2005). Comparison of two combined plows with conventional plow and their effects on soil physical properties and draft resistance. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[2] Beigi Mohsen (2006). Desigen And Method of construction of a three-point hitch dynamometer. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[3] Mokhtarzadeh Peyman (2006). Design and fabrication of a hydraulical mechanism to control the discharge spout direction in choppers (up & down – right & left). A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[4] Eizadi Ali Reza (2007). Design and fabrication procedure of a pasture seeder. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[5] Taghiloo Hasan Ali (2007). Design and fabrication method of a PTO driven tree cutter. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[6] Shirneshan Alireza (2007). Design and Fabrication Procedure of a leaf vacuum shredder. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[7] Fazel Farhad (2008). Design and Fabrication Procedure of A Sod Cutter Machine. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[8] Yoosofvand Ali (2008). Prototype of an electronic micro relief-meter. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[9] Ahmadi Masineh Iman (2009). Semi-automatic alfalfa yield monitoring system for smallsquare baler. A thesis submitted in partial fulfillment of the requirements for the degree of Doctor of Philosofy in Mechanics of Agricultural Machinery, Azad University, Unit of Sciences and Researches, Tehran, Iran.
[10] Lotfalian Dehkordi Amin (2009). Design and fabrication of solar dryer. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
[11] Fatehi Moslem
[12] Mohammadi Abazar
[13] Karami Rahim
Thesis advisor:
[1] Mahmoudieh Ramazanali, (2006). Effect of different tillage management and stemless on potato physical and mechanical properties. A thesis submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy, Department of Farm Machinery, Islamic Azad University, Tehran, Iran.
[2] Rafatja Seid Mojid, (2002). Improvement of a seed drill and its effect on quality and quantity of rapeseed yields. A thesis submitted in partial fulfillment of the requirements for the degree of Master of Philosophy, Department of Agronomy, Islamic Azad University, Khorasgan Branch, Isfahan, Iran.
[3] Raghami Nikan (2009) Distinction of Defected Potatoes from Intact Potatoes via Ultrasonic Method. A thesis submitted in partial fulfillment of the requirements for the degree of Master of science, Department of Farm Machinery, Shahre-Kord University, Shahre-Kord, Iran.
PERSONAL:
Borne in Isfahan, in the centre of Iran, on 25/03/1955, married and having 3 children (girls).
|
اين صفحه چاپ شود 